Bond ETF Duration Explained: How Rate Moves Hit Bond Funds

What effective duration, yield to maturity and convexity mean on a bond ETF factsheet, how a 100 basis point rate move flows through to price, and the risks behind the numbers.

2026-11-09 · Updated 2026-11-10 · 8 min read

Key takeaways

  • Effective duration turns a factsheet label into arithmetic — multiply it by the change in yield to estimate a fund's price move.
  • Yield to maturity is a yield on the portfolio at today's price, not a promised return, and it is quoted before fees.
  • Convexity is the second-order term and matters most when rate shifts are large or the portfolio holds callable or mortgage bonds.
  • Duration covers interest-rate risk only; credit, liquidity and cost risk each need their own line on the factsheet.

Why duration is the first number to read on a bond ETF factsheet

A bond ETF does not reprice because the coupons inside it changed. It reprices because the market's required yield changed, and every future coupon and principal payment is now discounted at a different rate. Duration packages that relationship into a single number you can multiply.

Maturity is not duration

Average maturity tells you when principal comes back. Duration tells you how much the fund's price cares about interest rates. A portfolio of long-dated bonds with high coupons carries less duration than the maturity figure alone would suggest, because a large share of the cash flow arrives early. The two are related but not interchangeable, which is why issuers print both.

Vanguard's Total Bond Market ETF (BND) is a useful example. Its factsheet reported an average duration of 5.7 years against an average effective maturity of 8.3 years, with a 0.03% expense ratio, as of 30 September 2026 (Vanguard BND factsheet, PDF). The gap is the point: the portfolio's cash flows arrive, on average, in 8.3 years, but its price behaves like something closer to 5.7 years because coupons paid along the way shorten the effective horizon.

Where the numbers sit on the page

US fund pages typically pair a 30-day SEC yield with duration and convexity. European UCITS factsheets show the total expense ratio alongside effective duration and either yield to maturity or yield to worst. The labels are not interchangeable across jurisdictions — a US standardised yield and a European yield-to-worst figure are calculated differently and should not be compared directly.

What the three factsheet measures actually mean

Effective duration

Effective duration estimates the percentage price change for a small, parallel shift in the yield curve. The Basel Committee on Banking Supervision defines duration as "a measure of the percentage change in the economic value of a position that will occur given a small change in the level of interest rates", and defines effective duration specifically as the percentage change in price for a one basis point change in yield (BCBS, Principles for the Management and Supervision of Interest Rate Risk, PDF).

The same document draws the line between the two variants: modified duration is standard duration divided by (1 + r) and, like simple duration, assumes a linear relationship between price changes and rate changes; effective duration relaxes both that assumption and the assumption that payment timing is fixed, which is why it is the more robust measure for bonds with embedded options.

The OCC's supervision handbook uses the plainer wording — duration is "the measure of the price sensitivity of a fixed-income investment to a change in interest rates" — and notes that economic value is "generally more sensitive to changes in interest rates for banks with longer-term positions and positions with embedded options" (OCC Comptroller's Handbook, Interest Rate Risk, PDF).

Yield to maturity and yield to worst

Yield to maturity is the single discount rate that equates the present value of the portfolio's expected cash flows with its current price. Two properties matter:

  • It is a snapshot of today's portfolio at today's price, and it assumes every coupon is reinvested at that same rate until maturity — an assumption that rarely holds over multi-year horizons.
  • It is quoted before the fund's ongoing charges in most presentations, so the yield a holder actually collects is lower by the expense ratio.

For callable bonds the figure is usually quoted as yield to worst, which assumes the bond is redeemed at the least favourable date. The measure is also not defined the same way on both sides of the Atlantic: in the US, funds report a standardised 30-day SEC yield computed to a regulator's formula, while UCITS documents report yield to maturity or yield to worst. Reading one as if it were the other is a common error.

Convexity

Convexity measures how duration itself changes as rates change. The OCC handbook describes it as "the change in a security's duration as interest rates and prepayment speeds change", and it is the reason a duration estimate is only a first-order approximation.

Negative convexity is the norm for mortgage-backed securities. The OCC gives a worked illustration: a five-year instrument bought with one duration could see that duration fall to two to three years in a falling-rate scenario, as homeowners refinance and principal returns early, and stretch to eight to ten years when rates rise and prepayments slow. In both directions the holder experiences an adverse change — gains are smaller than duration alone predicts and losses are larger (OCC Comptroller's Handbook, Interest Rate Risk, PDF).

A worked example: 100 basis points

One basis point is 0.01 percentage point, so 100 basis points equal a 1.00 percentage point shift. The first-order rule is arithmetic:

Approximate price change ≈ −(effective duration) × (change in yield, as a decimal)

Take BND's published 5.7-year average duration as the input. A parallel 1.00 percentage point rise in yields implies an approximate price fall of 5.7% before any convexity adjustment; a 0.25 percentage point rise implies roughly 1.4%. On a $10,000 position the first estimate is a fall of about $570, assuming the duration figure itself does not move.

The table below applies the same arithmetic across a range of durations, including the BND figure:

Effective duration (years) Approx. price change, +1.00 pp Approx. price change, −1.00 pp
1 ≈ −1.0% ≈ +1.0%
3 ≈ −3.0% ≈ +3.0%
5.7 (BND, 30 Sep 2026) ≈ −5.7% ≈ +5.7%
7 ≈ −7.0% ≈ +7.0%
15 ≈ −15.0% ≈ +15.0%

Three caveats come straight from the supervisory literature:

  • The estimate is a linear approximation. The regulatory definition itself is framed around a "small change" in rates, and convexity is the second-order term that corrects it when shifts are larger.
  • It assumes the whole curve moves in parallel. The OCC handbook splits interest rate risk into repricing risk, basis risk, yield curve risk and options risk — a fund can be hurt by a curve that steepens or flattens even when its duration number is unchanged.
  • The duration figure reflects the portfolio on the date printed on the factsheet, not the portfolio on the day you read it.

Short duration versus long duration: the trade-off

The choice is not about which is better; it is about which risk an investor is willing to hold.

  • Roughly 1–3 years: small price moves in either direction, a yield that tracks policy rates closely, and faster return of capital. The cost is reinvestment risk — cash comes back when yields may be lower — and limited participation in a rally.
  • Roughly 4–8 years: the middle ground most broad aggregate bond funds occupy; BND's 5.7 years sits here.
  • Roughly 15 years and up: the largest sensitivity in both directions, which is why these funds are used for deliberate rate positioning rather than as a cash substitute.

Longer duration also means more exposure to the term structure itself. The Basel framework notes that markets "require a premium or spread over the risk-free rate to cover duration risk", one reason yields usually rise as maturity lengthens (Basel Framework, SRP98).

Risks and costs

  • Interest-rate risk is the headline risk duration quantifies, and it is symmetric: the tightening that hurts a long-duration holder is the same move that helps the holder who is short.
  • Yield-curve risk: two funds with identical duration can behave differently if the curve steepens or flattens. Regulators treat repricing, basis, yield curve and options risk as distinct components, not as one number (OCC Comptroller's Handbook, PDF).
  • Credit and spread risk: duration says nothing about credit quality, and spread widening can hurt a corporate bond fund even when Treasury yields are flat. See our note on corporate bond ETF liquidity, spreads and stress risk.
  • Liquidity risk: the secondary market for the underlying bonds, not only the ETF itself, determines how tightly the fund trades. For how fund prices can diverge from net asset value, see ETF creation and redemption.
  • Reinvestment risk: yield to maturity assumes coupons are reinvested at the same rate for the whole holding period, which rarely holds in practice.
  • Costs: duration is a gross price measure, but holders pay net. BND's total annual operating expenses were 0.03% — a 0.02% management fee plus 0.01% other expenses (Vanguard prospectus, PDF). For context, Vanguard's own fund page shows an asset-weighted industry average ETF expense ratio of 0.23% and an average of 0.54% for similar funds, as of 31 December 2025 (Vanguard BND fund page). By fund category, the Investment Company Institute reports that in 2025 the asset-weighted average expense ratio for index bond ETFs was 0.09%, compared with 0.36% for bond mutual funds (ICI, Trends in the Expenses and Fees of Funds, 2025, PDF). Tracking difference is a separate figure — see reading an ETF factsheet and TER versus total cost of ownership. Currency-hedged share classes add a hedging cost that no duration figure captures (currency-hedged vs unhedged ETFs).
  • Jurisdiction and tax: in the EU, UCITS bond funds are offered as distributing or accumulating share classes and the tax treatment of each depends on the member state, with product costs disclosed under PRIIPs KID rules; in the US, funds report the standardised 30-day SEC yield and distributions are taxed under US rules. Neither treatment is universal. See accumulating vs distributing ETFs.
  • Duration mismatch as a solvency question: supervisors treat interest rate risk as a capital issue for institutions, not only a mark-to-market annoyance. The OCC states that "[e]xcessive or poorly managed IRR can threaten a bank's earnings and capital", and its handbook measures the effect on a bank's economic value as well as on near-term earnings (OCC Comptroller's Handbook, Interest Rate Risk, PDF).

Bottom line

Effective duration, yield to maturity and convexity are the three numbers that turn a bond ETF factsheet from a holdings list into a risk profile. Duration gives the first-order estimate of a price move for a given change in yields; yield to maturity describes the income the portfolio offers at today's price, before fees; convexity tells you how much to discount the duration estimate when the rate move is large. All three describe market risk. None of them describe credit quality, liquidity or cost, which need their own lines on the same page.

The funds named above appear as factsheet examples on our research watchlist only. The figures illustrate how the mechanics work, not how any fund is likely to perform.

This article is for information and education only. It is not investment advice and does not take into account your personal situation. Read the full disclaimer.

Follow the shortlist

Comparing ETFs on cost, liquidity and structure? Our global ETF and stock research watchlist is tracked daily. Premium members get the full list, the reasoning behind every entry and updates when entries change.

See premium access

Information and education only, not investment advice.

Related